MARIAN Ucon CX

The UCON CX is a compact, powerful device in 9,5“ size, which will be connected with the PC via USB2. UCON CX is equipped with analog, digital and MIDI inputs and outputs, which all can be used simultaneously (full duplex). This makes UCON CX to an universal usable device. UCON CX has an integrated, DSP based digital mixer. Thus, you can mix all available input and output signals to one dedicated output – remote controlled by the PC. As a special feature, the UCON CX works also as a stand-alone 8-channel I/O ADAT™ converter

MARIAN UCON CX Ports
• 4 Analog inputs, balanced (front: XLR and ¼’’ TRS)
• 4 Analog inputs, balanced (back: ¼’’ TRS)
• 8 Analog outputs, balanced (back: ¼’’TRS)
• 1 S/PDIF I/O (TOSLINK)
• 1 ADAT™ I/O (TOSLINK, alternatively to S/PDIF I/O)
• Mix line output, balanced (back: 2x ¼’’ TRS)
• Mix headphone output (front: ¼’’ Stereo jack)
• MIDI In, Out, Thru
• Wordclock / Superclock input with switchable termination
• USB2 port
• Connector for external power supply

MARIAN UCON CX features
• Front panel inputs:
- Microphone preamplifiers
- -20 dB switch
- Switchable phantom power +48 V for the XLR ports
- Usable as instrument input (Bass, Guitar)
• Headphone output with volume control
• Automatically level adjustment when using unbalanced input signals
• All analog inputs with gain control
• All outputs with volume control -90 dB – 0 dB
• Supports 24 bit / 96 kHz with Analog I/O and S/PDIF I/O
• Latency free 32 channel DSP mixer
• Latency free hardware-monitoring
• Using ASIO latency periods of 2 ms are possible
• Support for reading DAT Markers
• MIDI stream optimization, free configurable MIDI-Filter
• Synchronization as Clock-Master (Internal clock to S/PDIF, ADAT™ output)
• Synchronization as Clock-Slave (External clock from Wordclock, S/PDIF, ADAT™ input)
• Stand-Alone operation as 8-channel I/O ADAT™ ADDA converter • Multiclient Driver: Windows 2000/XP: MME, ASIO 2.0, GSIF, WDM-Audio, DirectSound

MARIAN UCON CX Technical Data
• Inputs 1-4 on the front:
- Impedance ¼" jack 1 MOhm; 10 kOhm with -20 dB switch active
- Impedance XLR jack 2 kOhm
- Level adjustment -72 dB - +58 dB; -20 dB Switch
- Phantom supply +48 V / 10 mA

• Inputs 5-8 on the back:
- Impedance 10 kOhm
- Level adjustment -72 dB - +18 dB
• Max. Input Level +12 dBu
• Max. Output Level @ 600 Ohm: +4,3 dBu
• Max. Output Level @ 10 kOhm: +7,5 dBu
• Frequency response @ 44,1 kHz: 20 Hz - 20 kHz
• Frequency response @ 96 kHz: 20 Hz - 40 kHz
• SNR AD @ 44.1 kHz: 104 dB(A)
• SNR DA @ 44.1 kHz: 110 dB(A)
• THD+N AD @ -0,5 dbFS: 0,003%
• THD+N DA @ 0 dbFS: 0,002%
• Sample formats: 8, 16, 20, 24, 32 Bit Mono/Stereo
• Sample rates Analog: 8 - 96 kHz +/- 15% Pitch • Sample rates Digital: 32 - 96 kHz +/- 15% Pitch
• Sample rates ADAT: 36 – 52 kHz
• Dimension (WxHxD) in mm: 218 x 44 x 130
• External Power Supply