Stereo Pair of BT-201/3S

JZ Microphones BT-201/3S



This stereo pair set of BT-201 mics comes with two sets of 3 interchangeable capsules and provide balanced stereo recordings.

JZ Microphones' BT-201/3 is a small diaphragm condenser microphone with different changeable capsules offering optional choice of patterns that satisfy the demands of all common studio and live applications - cardioid, omni, and open cardioid.

The main benefits of this new microphone include easy changeable capsules based on magnet connection, an all-metal body which provides high reliability, low self noise and very detailed sound with smooth and transparent highs, optimal presence and natural low end response. Each capsule is carefully tested for all parameters and measured in an anechoic chamber for optimum performance. As with previous models, this mic has a five year warranty from the date of purchase.

Features/Specifications:

* Transducer type: Electrostatic
* Operating principal: pressure gradient
* Diaphragm's active diameter: 13 mm
* Frequency range: 20 Hz - 20 kHz
* Polar pattern: cardioid, open cardioid, omni
* Output impedance: 50 ohms
* Rated load impedance: 1000 ohms
* Suggested load impedance: >250 ohms
* Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa
* S/N Ratio CCIR 468-3 weighted: 71 dB
* S/N Ratio DIN/IEC 651 A-weighted: 82 db-A
* Equivalent noise level DIN/IEC A-weighted: 12 dB-A
* Maximum SPL for 0.5% THD at 1000 ohm load: 140 dB
* Dynamic range of the microphone preamplifier: 128 db
* Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
* Current consumption: < 2 mA
* Output connector: 3-pin XLR male, gold plated contacts
* Signal polarity: Positive toward pressure on a diaphragm produces
positive polarity voltage on XLR pin #2 relatively to pin #3
* Dimensions: 161.5 mm length x 24 mm>BR> diameter together with magneticallyattached head, 140 g