Antelope Edge Strip


Antelope Edge Strip

Discrete Analog Design

The Edge Strip bundle offers natural analog sound, combined with the benefits of precise digital control.
The Discrete MP includes two XLR+TRS combo inputs, as well as two TRS outputs. The discrete analog circuits in the Discrete MP offer up to 61dB of maximum gain, and total control over the coloration, clarity, and character of the preamps.

Meanwhile, the USB connection offers a simple way to control the Edge Strip remotely, from the comfort of your computer.

Each Edge Modeling Microphone consists of a special double-sided capsule with 3 microns gold sputtered membranes. This allows us to accomplish multi-dimensional modeling and emulate a variety of different microphones, polar patterns and even control the proximity effect.

Experience EDGE at its maximum

Antelope Audio’s engineering team designed the Discrete MP to perfectly match the character of the Edge Modeling Microphone.

Both Discrete MP and Edge Modeling Microphone are fully analog, which means they’ll work with any system. Thanks to its dedicated calibration oscillator, Discrete MP is easily adaptable to all studio setups, even those without precise gain linking between two channels. When connecting to a new system, simply engage the built-in oscillator to calibrate the Discrete MP for perfect gain staging.

Pristine sound
under the hood

Use the Discrete MP to capture the tone of your favorite mic in crystal clear detail. Or, pair the Edge Modeling Microphone with your favorite preamp to create unique sounds.

However, using the Discrete MP with the Edge Modeling Microphone unlocks its full potential. Both units utilize discrete analog circuitry and were designed by Igor Levin himself to complement each other perfectly.

By using the free native plug-ins, you can audition countless combinations of microphones, preamps, and vintage outboard gear to get the perfect tone.

Special AFX

The Edge Strip bundle includes our custom AFX signal processors, including a growing list of superior microphone emulations, bringing field-proven microphone legends into your setup. The AFX experts, in cooperation with analog engineers and mic designers, developed these microphone emulations.
The Edge Strip includes 4 vintage mic emulations, 3 classic German preamp emulations, our famous Stay-Levin compressor, and a vintage EQ to help you sculpt the perfect tone – all for free! However, if that’s not enough, you can upgrade with dozens of other modeled units featured in our FPGA FX library.

Bring your recordings to life using the remarkable sounds of vintage gear. Hear the past and record the future with Antelope’s native DSP effects. Each plug-in uses a high degree of oversampling and precise floating-point calculations to accurately model vintage effects with unparalleled detail. Even when emulating microphones, preamps, and signal processors, you can breathe easy, knowing the Edge Strip offers minimal latency, and Antelope Audio’s signature sound.

Pick up an Edge Strip today, and say goodbye to your bulky vintage gear!

Technical Specifications

  • Analog Inputs

    2 x Mic Inputs (combo 3-pin)
    Mic (XLR only): max 20dBu balanced
    Mic input impedance : 1.2kOhm
    Line (1/4 /TRS/ only): max 29dBu balanced
    Line input impedance : 21kOhm

  • Analog Outputs

    2 x TRS (22 dBu max)
    Output impedance: 56 ohms

  • Digital Connectivity

    USB 2.0 I/O with Type B connector – only used for remote control

  • Mic Preamp Gain

    Remotely controlled, digitally adjustable Gain, preset Gain – press and turn the button to set the preset gain, or just click it to set the gain to the preset number.
    • Gain Range: 0dB to 61dB; 1dB step
    • 48V Phantom Power

  • Callibration Oscillator

    Calibration oscillator of 6dBu @ 1kHz for accurate gain calibration

  • THD + N (Total Harmonic Distortion + Noise):

    -106.0 dB @ 10 dBu, 1kHz sine, 50 ohm balanced input

  • EIN (Equivalent Input Noise):

    -128 dBu (A – weighted)

  • Freq Response:

  • 10Hz – 200kHz /-3dB @ 200kHz/

  • Dynamic Range:

  • Dynamic range = -126 dBu

  • Dimensions (Approx)

    Width: 190 mm
    Height: 46.5 mm
    Depth: 157 mm

  • Operating Temperature

    0-50°C, 32-122°F

  • Weight

    • Unit weight: 950 grams
    • Adaptor weight: 180 grams
    • Total weight: 1130 grams

  • Power Consumption


  • Diaphragm:

    Condenser (Double sided with 10 microns gold sputtered membranes)

  • Freq. Response:

    20HZ ~ 20KHZ

  • THD+N


  • Power Requirements:

    48V DC Phantom Power

  • DiscreteMP
  • Edge microhpone
  • Microphone cable /5pin -> 2 x 3pin/
  • Shock mount
  • Pop filter
  • Power supply
  • USB cable
  • Quick Start Guide and Upgrade Guide
  • Serial numbers and authorisation codes

System requirements


USB 2.0 equipped Mac or PC
Core 2 Duo minimum, Core i3/i5/i7/Xeon recommended
4 GB RAM minimum, 8 GB RAM recommended

Operating system

OS X 10.11 (El Capitan) or greater
Windows 10

Additional Info: Internet connection required for product activation..

All plug-ins are iLok protected. An iLok is required in order to use them. iLok is not provided by Antelope Audio and must be purchased separately.


Antelope Audio


Još nema recenzija.

Budite prvi koji će recenzirati “Antelope Edge Strip”