The A-100 Mini System is an useful minimal configuration of the A-100 system. It contains ten modules including a MIDI interface and is housed in a 6U Wooden Cabinet.
Following modules are contained in the Basic System MINI:
- 2x Standard VCO A-110
- 1x Ring Modulator A-114
- 1x Noise/Random A-118
- 1x VCF1 A-120 (24dB low pass 1)
- 1x logarithmic VCA A-131
- 1x logarithmic Mixer A-138b
- 1x ADSR A-140
- 1x LFO A-145
- 1x MIDI-to-CV/Gate/Sync Interface A-190
The case is a LC6 lowcost wooden case with U (2x 84HP). The power supply consists of a toroidal transformer generating 1200mA for the +12V and -12V rails each an two buss boards as power distribution.
case: IEC mains inlet
A-110: CV1, CV2, PW CV1, PW CV2, Sync, pulse, sawtooth, triangle, sine
A-114: per section: X In, Y In, X*Y Out
A-118: white noise, colored noise, random
A-120: audio in, 3x Cutoff CV inputs, audio out
A-131: 2x audio in, 2x CV in, audio out
A-138b: 4 inputs, 1 output
A-140: gate, retrigger, 2x out, inverted out
A-145: reset in; wave outs: triangle, sine, rectangle, saw, ramp
A-190: Midi In/Thru, CV1 out, CV2 out, gate out, clock out, reset out
outer dimensions: 445 x 275 x 160 mm (WxHxD)
inner dimensions: 2 x 84 HP x 3U.
Usable width for Eurorack modules: ~90mm near the power supply, ~110mm elsewhere; measured from the back of the modules.