KRK 12sHO – aktivni subwoofer je savršeni izbor za ultra precizno Bass-proširenje velikih snaga.
KRK 12sHO – Tehničke specifikacije:
- Configuration:Front loaded, vented subwoofer
- System type:Active Subwoofer
- Low-Frequency:12″ woven Kevlar High Performance woofer
- Frequency Response:
- 29.2Hz – 60Hz – 160Hz (L/R inputs), 29.1Hz – 211Hz (LFE input)
- Max Peak SPL:123 dB
- Amplifier Class:Class A-B
- Power Output:400 Watts Continuous @ 1% THD+N @ 100Hz
- SNR (signal to Noise Ratio):92dB
- Amplifier Distortion (THD+N):≤ 0.1% @-3dB of Max Power Output 20Hz – 200Hz
- Input Impedance (Ohms):10 kΩ Balanced or unbalanced
- Ground Lift:On / Off
- Low Pass Frequency:60Hz to 160Hz
- HPF bypass:with footswitch only
- Footswitch:Included
- Phase:Rotatable Phase + Polarity Switch
- System Volume:-30dB to +6dB
- Indicators:Power, protection, limiter
- Input Connectors:
- Balanced XLR for Left and Right Inputs
- LFE input:Balanced XLR
- Output Connectors:
- Stereo Balanced XLR for left and right.
- AC Power Input:Selectable 110V-120V / 220V-240V
- Enclosure Construction:18mm and 36mm reinforced MDF
- Finish:Textured Paint
- Port Configuration:Front Firing Quad Concentric Slot Ports
- Finish:Textured Paint
- Grille:N/A
- Dimensions (H x W x D):20″ (508 mm) x 20″ (508 mm) x 22.48″ (571mm)
- Weight:109.7 Lbs. (49.7 Kg.)
Accessories Shipped with Product
- Footswitch for bypass operation, with remote indication of bypass (clip and limit TBD)
- Cable for footswitch (5m)
- Feet – Rubber and Spikes
- User Guide / Warranty
* For improvement purposes, specifications and design are subject to change without notice.
KRK 12sHO Features
- Curved Baffle Curved front plate design virtually eliminates diffraction distortion
- Front-firing Port provides low frequency extension while reducing boundary coupling and the unique shape is optimized to avoid port turbulence
- Bypass Footswitch Control allows you to defeat the sub and provide full range audio to your recording monitors for use with a standard latching 1/4 inch mono footswitch
- Kevlar 12″ Driver – High Excursion woven Kevlar driver cone
- Thermal and Overload / Clip Protection to prevent damage
- Input Sensitivity on rear of unit allows a high resolution gain range, labeled are positions for MUTE, +6dBu and -8dBu
Recenzije
Još nema recenzija.